Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
A push switch dedicated to Favour's T2717 and T2815 torches.
Picatinny rail mount dedicated to Favour's T2717 and T2815 torches. Also fits all other 25mm (1") diameter torches and scopes.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide. In addition, a bag-pouch (Polish manufacture) and 100 copper-plated 7.62x39 shells are included.
Security Policy
Delivery Rules
Return Policy
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide. In addition, a bag-pouch (Polish manufacture) and 100 copper-plated 7.62x39 shells are included.
Steel ammunition box for 250 rounds of 7.62x54R tape. Box in vehicle version - for PKT machine gun. With a special holder for mounting inside a tank, armoured personnel carrier or other vehicle.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
A Polish steel magazine, designed for the M 88 Tantal rifle - the Polish rifle for 5.45x39 ammo. Also suitable for AK-74 and other rifles from the AK family for 5,45x39 ammo. Standard capacity of 30 rounds 5,45x39.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Polish steel magazine, designed for 7,62x25 rounds. Fits all PPS-43 submachine guns. Standard capacity of 35 rounds 7,62x25.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Soviet steel magazine, designed for the SVD sniper rifle. Standard capacity of 10 rounds of 7.62x54R.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Magazine for the Soviet PPSz-41 submachine gun, holding 35 cartridges.
NATO standard ammunition box (M2A1 or M2A2). Steel box, hermetically - flap with seal. Two carrying handles. Flap can be removed.
Loader and 4 clips to 15 cartridges each of calibre 5.45x39 mm designed for fast loading magazines to AK-74. They also fit ammunition and magazines in calibre 5.56x45 - e.g. for the Polish rifle Beryl.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Polish, plastic magazine, designed for the Beryl rifle. Also suitable for other rifles from AK family for 5.56x45 cartridge. Standard capacity of 30 rounds.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Case (box) of a Polish steel magazine, designed for 7.62x39 rounds. Fits all AK rifles for 7,62x39 rounds. Standard capacity of 10 rounds 7,62x39. The magazine is designed for the AK-GN - with a lock for shooting blank ammunition. The lock can be easily removed. The box only - no feeder, spring or bottom!
Ammunition box for PK/PKM machine guns. Holds a belt of 100 7.62x54R rounds. Made of thinner aluminium plates, cover made of steel. Boxes in perfect condition.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Russian steel magazine, designed for the SVD sniper rifle. Standard capacity of 10 rounds 7.62x54R. Feeder and lower spring lock made of plastic.
Clip for 10 rounds of 5.56x45 calibre. Designed for rapid magazine loading.
Ammunition magazine for PK/PKM machine guns. Holds a belt of 100 7.62x54R rounds. Made of thick codura type fabric, zipped. Cover made of special plastic.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Soviet Bakelite magazine, designed for 7.62x39 rounds. Fits all AK family rifles for 7,62x39 rounds. Standard capacity of 30 rounds of 7.62x39.
Produced at the Izhevsk factory - factory logo on the side - arrow in a triangle.
Metal ammunition box for tape with 250 rounds of 7.62x54R. Such boxes carry ammunition for PK/PKM, Pecheng and formerly Maxim machine guns.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Magazine for the DP (Diegtiariev Infantry) hand-held machine gun of 7.62x54R calibre. These rifles were introduced in 1928 and remained in use until the 1950s. Capacity of 47 rounds of 7.62x54R.
Bullets from the 5.56x45 ammunition (bullet lenght 23 mm) used in NATO assault rifles. This ammunition is used in the M-16, M-4, Beryl, Grot, G-36 and others.
Wiper for AK-47/AKM, SVD, PK, PKM and other of calibre 7.62 mm. Mounted to steel ramrod.
Powder charge pouch for the howitzer M 37 ML-20 (152-мм гаубица-пушка образца 1937 года МЛ-20). Gunpowder was delivered to the gun crew in such pouches. The pouches made in the 1940s.
Metal oiler for machine guns. Used in the Polish Army mainly for DP machine guns.
Bullets from ammunition 5.45x39 (bullet lenght 25 mm), commonly used in assault rifles in the old Warsaw Pact: AK-74, Tantal and others.
Shells from 7.62x25 ammunition used in pistols and submachine guns of Russian and Soviet design: TT, PPSh, PPS and others Made of steel and coated with a thin copper coating to prevent rusting.
Shells from 5.56x45 intermediate ammunition used in NATO assault rifles. This ammunition is used, inter alia in M-16, M-4, Beryl, Grot, G-36 and others. Made of steel and painted to prevent rusting.
Shells from 7.62x39 intermediate ammunition, commonly used in assault rifles in the old Warsaw Pact: AK-47, AKM, vz. 58 and others. Made of steel and coated with a thin copper coating to prevent rusting.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide. In addition, a bag-pouch (Polish manufacture) and 100 copper-plated 7.62x39 shells are included.
