A steel ramrod for the TT pistol or other pistols and revolvers - designed for 7.62mm calibre weapons.
Steel ramrod to the PPSh or PPS sub-machine gun - calibre 7.62 mm. With the tool facilitating taking the weapon to pieces.
Brush for AK-47/AKM, SVD, PK, PKM and other of calibre 7.62 mm. Mounted to steel ramrod. Polish production - better quality than Soviet.
Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
Security Policy
Delivery Rules
Return Policy
Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
The O-ring seal system guarantees waterproof . The torch meets the IP67 waterproof and dustproof standard (total protection against dust penetration, protection against flooding when submerged 1 m below the surface of water for 30 min) and is resistant to falls from a height of 2 m according to the ANSI standard.
It is equipped with an XM-L2 Cree White LED. Thanks to it, the torch shines in the selected mode with the same power until the battery is completely exhausted.
To check the battery status, the torch has a built-in Battery Power Indicator system, which shows the state of charge of the battery. Charging time of the torch is approximately 4 hours.
Included with the torch are a micro USB cable, safety cable and instructions.
The torch works with the REMOTE CABLE SWITCH FA1002 and PICATINNY RAIL MOUNT FA1001.
Operating modes: (luminous flux / range / max. operating time)
HIGH - 1030 lm / 270 m / 4.5 h
MED - 420 lm / 170 m / 8.5 h
LOW - 40 lm / 50 m / 80 h - economical light for long periods of use, non-glare reading and working
STROBE 8 Hz - flashes of light with annoying glare effect for, among other things, self-defence
Torch specifications:
LED configuration: 1 x XM-L2 Cree White LED
Waterproof: IP67
Power supply: 1 x 3.7V 2600mAh 18650 Li-ion battery
Length: 139 mm
Diameter: 33mm
Weight: 200g (with battery)
Original WW2 tarpaulin cover for the Mosin rifle disassembly and cleaning utensil set. Tied with a ribbon.
Recoil cap for shooting blank 7.62x54R ammunition. For PKM machine gun.
Wooden holster for the Soviet Stechkin pistol - APS. Attached to the belt with a steel clip. It can be attached to the pistol as a buttstock, making aiming much easier.
Polish, metal oiler for AK rifles. Version with two chambers - for cleaning fluid and grease.
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech . Complete with reamer key.
Mosin rifle blade (front sight) adjustment device. Made of steel, in a wooden box. Manufactured in 1944.
Soviet, plastic oiler to AK/RPK/SVD rifles and other. With logo weapon factory from Izhevsk.
Key-screwdriver for dismantling the Mosin rifle. Key in the version produced in the years 1941-43 - simplified, with poor quality steel, raw surfaces.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
Original WW2 tarpaulin cover for the Mosin rifle disassembly and cleaning utensil set. Tied with a string.
Cork shielding the barrel to the rifle AK. Made of soft rubber protects the barrel against damp and pollutants. Perfectly is suitable also for an protection of the barrel rifles during the transport - even with extended flash hidder - protecting the edge of the hidder from damaging.
A steel ramrod for the TT pistol or other pistols and revolvers - designed for 7.62mm calibre weapons.
Steel ramrod to the PPSh or PPS sub-machine gun - calibre 7.62 mm. With the tool facilitating taking the weapon to pieces.
A push switch dedicated to Favour's T2717 and T2815 torches.
Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
