Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
A push switch dedicated to Favour's T2717 and T2815 torches.
Picatinny rail mount dedicated to Favour's T2717 and T2815 torches. Also fits all other 25mm (1") diameter torches and scopes.
Soviet, metal oiler to Mosin or AK rifles.
Security Policy
Delivery Rules
Return Policy
Soviet, metal oiler to Mosin or AK rifles.
Recoil cap for shooting blank 7.62x54R ammunition. Early version - for PK and PKT machine gun.
Recoil cap for shooting blank 7.62mm ammunition. For AK-47 or AKM rifles.
A push switch dedicated to Favour's T2717 and T2815 torches.
Screwdriver-key for dismantling a PPSh or PPS submachine gun.
AK-47/AKM cleaning kit. Steel ramrod, brush, key/screwdriver, striker. Metal container.
7.62mm calibre SVD rifle cleaning tool. Steel wiper, brush, screwdriver spanner and drift. In a metal container. Container with spanner to adjust the bore on the gas piston.
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech. Complete with reamer key.
Original WW2 tarpaulin cover for the Mosin rifle disassembly and cleaning utensil set. Tied with a string.
Recoil cap for shooting blank 7.62x54R ammunition. For PKM machine gun.
Original WW2 tarpaulin cover for the Mosin rifle disassembly and cleaning utensil set. Tied with a ribbon.
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech. Designed for 7.62x39 calibre ammunition.
Mosin rifle disassembly and cleaning kit. Key-screwdriver, wiper, mottled barrel guard, cotter pin and bushing-grip.
Key-screwdriver for dismantling the Mosin rifle. Key in the version produced in the years 1941-43 - simplified, with poor quality steel, raw surfaces. Various items, no particular differences.
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech. Designed for 7.62x54R calibre ammunition (e.g. SVD, PK/PKM, Mosin, DP/DT, etc.).
Bullets from the 5.56x45 ammunition (bullet lenght 23 mm) used in NATO assault rifles. This ammunition is used in the M-16, M-4, Beryl, Grot, G-36 and others.
Screwdriver from the rifle disassembly and cleaning kit. Together with a wooden handle - this is how they were completed before and during the Second World War and later. On some the Tula factory logo (star) is visible.
Key-screwdriver for dismantling the Mosin rifle. Key in the version produced in the years 1941-43 - simplified, with poor quality steel, raw surfaces. Various items, no particular differences.
Shells from 7,62x54R ammunition used in Russian and Soviet design rifles: Maxim, Mosin, SVD, PK/PKM, Pecheneg, and others. Made of steel and coated with a thin copper coating to prevent rusting.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide.
Soviet metal oiler for Maxim machine guns. Also often used for other machine guns (e.g. PK/PKM).
Bullets from ammunition 7.62x54R (bullet lenght 32 mm), commonly used in rifles and machine guns in the old Warsaw Pact: Mosin, SVD, PK/PKM and others.
Polish, metal oiler for AK rifles. Version with two chambers - for cleaning fluid and grease.
Shells from 5.45x39 intermediate ammunition commonly used in former Warsaw Pact assault rifles: AK-74, RPK-74, AK-12, wz. 88 Tantal and others. Made of steel and painted to prevent rusting.
Shells from 7.62x39 intermediate ammunition, commonly used in assault rifles in the old Warsaw Pact: AK-47, AKM, vz. 58 and others. Made of steel and painted to prevent rusting.
Soviet, metal oiler to Mosin or AK rifles.
