- New

A steel ramrod for the TT pistol or other pistols and revolvers - designed for 7.62mm calibre weapons.
Steel ramrod to the PPSh or PPS sub-machine gun - calibre 7.62 mm. With the tool facilitating taking the weapon to pieces.
Brush for AK-47/AKM, SVD, PK, PKM and other of calibre 7.62 mm. Mounted to steel ramrod. Polish production - better quality than Soviet.
Soviet metal oiler for Maxim machine guns. Also often used for other machine guns (e.g. PK/PKM).
Security Policy
Delivery Rules
Return Policy
Soviet metal oiler for Maxim machine guns. Also often used for other machine guns (e.g. PK/PKM).
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech . Complete with reamer key.
Polish, metal oiler for AK rifles. Version with two chambers - for cleaning fluid and grease.
Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
Screwdriver from the rifle disassembly and cleaning kit. Together with a wooden handle - this is how they were completed before and during the Second World War and later. On some the Tula factory logo (star) is visible.
Original leatherette pouch for a set of disassembly and cleaning utensils for the Mosin rifle. Version used since the Second World War.
Picatinny rail mount dedicated to Favour's T2717 and T2815 torches. Also fits all other 25mm (1") diameter torches and scopes.
AK-47/AKM cleaning kit. Steel ramrod, brush, key/screwdriver, striker. Metal container.
Soviet pouch for magazines and accessories for the SVD rifle. Holds 4 magazines, a ramrod, a toolbox and a PSO-1 sight. Attaches to the belt with belt loops. Made of thick tarpaulin. Belt for SVD included.
7.62mm calibre SVD rifle cleaning tool. Steel wiper, brush, screwdriver spanner and drift. In a metal container. Container with spanner to adjust the bore on the gas piston.
Original WW2 tarpaulin cover for the Mosin rifle disassembly and cleaning utensil set. Tied with a ribbon.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
A steel ramrod for the TT pistol or other pistols and revolvers - designed for 7.62mm calibre weapons.
Key-screwdriver for dismantling the Mosin rifle. Key in the version produced in the years 1941-43 - simplified, with poor quality steel, raw surfaces.
Key-screwdriver for dismantling the Mosin rifle. Key in the version produced in the years 1941-43 - simplified, with poor quality steel, raw surfaces. Various items, no particular differences.
Metal assault tape for 25 7.62x54R ammo. Ended on one side with a guide and on the other side with a special link for connecting the next tape. Used for PK/PKM/Pecheng machine guns. The short, 25-round belts are designed for rifles carried during an attack. After firing 25 rounds, the empty belt splits and falls off, so that it does not impede the movement of the shooter. They are joined by a bullet or shell to any length.
Screwdriver from the rifle disassembly and cleaning kit. Together with a wooden handle - this is how they were completed before and during the Second World War and later. On some the Tula factory logo (star) is visible.
Shells from 5.56x45 intermediate ammunition used in NATO assault rifles. This ammunition is used, inter alia in M-16, M-4, Beryl, Grot, G-36 and others. Made of steel and painted to prevent rusting.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide.
Shells from 5.45x39 intermediate ammunition commonly used in former Warsaw Pact assault rifles: AK-74, RPK-74, AK-12, wz. 88 Tantal and others. Made of steel and painted to prevent rusting.
"7.62 mm submachine gun M 1941 and M 1943 - Description and use, principles and ways of shooting" contains a description of the construction and principles of use of the PPSh (M 1941 - Shpagin) and PPS (M 1943 - Sudayev) submachine guns. The methods of use and maintenance are described, as well as the basic principles and shooting positions. It also describes shooting with external factors, at moving targets and much more.
Shells from 7.62x25 ammunition used in pistols and submachine guns of Russian and Soviet design: TT, PPSh, PPS and others Made of steel and coated with a thin copper coating to prevent rusting.
Brush for AK-47/AKM, SVD, PK, PKM and other of calibre 7.62 mm. Mounted to steel ramrod. Polish production - better quality than Soviet.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide. In addition, a bag-pouch (Polish manufacture) and 100 copper-plated 7.62x39 shells are included.