Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
A push switch dedicated to Favour's T2717 and T2815 torches.
Picatinny rail mount dedicated to Favour's T2717 and T2815 torches. Also fits all other 25mm (1") diameter torches and scopes.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip rubber. Baton tip in plastic cover. Batons in very good condition, with possible scratches that do not affect use.
Security Policy
Delivery Rules
Return Policy
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip rubber. Baton tip in plastic cover. Batons in very good condition, with possible scratches that do not affect use.
Extended length: 650 mm (+/-5)
Collapsed length: 280 mm
Handle diameter: 27 mm
Weight: 645 g
Frog to the bayonet 6H3, 6H4 or 6H5. Made from olive carried tape and of metal press studs. Belt loop is being done up - it is possible to hang the bayonet as a default to the belt, or to strap MOLLE kit.
Soviet metal two-chambered rifle oiler. One chamber was for alkaline cleaning fluid (marked Щ - щелочной состав) and the other for gun lubricant (marked Н - ружейная смазка).
Shells from 14.5x114 large-calibre ammunition used in PTRS and PTRD anti-tank rifles and in KPW and KPWT machine guns. In the 1990s, several models of large-calibre sniper rifles were also developed for this ammunition. Made of steel and coated with varnish to prevent rusting.
Wooden (plywood) buttstock for PKM machine gun. Steel footplate with hole for storing the toolbox, cleaning brush and folding shoulder pad. New, unused - still without screw holes formed during assembly.
A brass ramrod for the TT pistol or other pistols and revolvers - designed for 7.62mm calibre weapons.
Clip for 10 rounds of 5.56x45 calibre. Designed for rapid magazine loading.
A clip for 10 rounds of 7.62x39 calibre ammunition. Designed for quick reloading of magazines, mainly in SKS rifles.
Loader and 2 clips to 15 cartridges each of calibre 5.45x39 mm designed for fast loading magazines to AK-74. They also fit ammunition and magazines in calibre 5.56x45 - e.g. for the Polish rifle Beryl.
Telescopic baton - tonfa, with an additional horizontal grip, from British police surplus. Made of hardened steel. Handle with special non-slip foam. With a lock to prevent folding.
Baton manufactured by the American company Monadnock, also used by the police and Military Police in the USA.
Batons in very good condition, with possible scratches that do not affect use.
A knife made of tough AUS6 steel. Handle lining made of special rubber. In the head of the handle a hole for a safety line and a glass breaker. Scabbard made of ABS, with possibility of fastening to the belt or MOLLE system. Blade with matt finish.
Pocket knife with blade lock. With eyelet and cord. Covers in olive green. Case in soft satin fabric.
Black, bakelite covers to the M44 signal pistol.
Folded, steel ramrod to the PPSh-41 sub-machine gun - calibre 7.62 mm.
Frog to the bayonet 6H3, 6H4 or 6H5. Made from Partisan Lieto carried tape and of metal press studs. Belt loop is being done up - it is possible to hang the bayonet as a default to the belt, or to strap MOLLE kit.
"7.62 mm SVDS Sharpshooter Rifle - Description and Use, Principles and Modes of Shooting - supplement to the publication 736/65" contains a description of the construction and change of use of the SVDS Rifle - i.e. the version with a folding (detachable) buttstock - relative to the basic version. This book is an addendum to the 736/65 manual, which is a complete description of the SVD Rifle.
Czechoslovak bayonet for rifle Sa vz. 58. Thick blade with armour plating. Bakelite lining riveted. Version lighter with short steel handle shank.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip foam. Batons in good condition, with possible scratches that do not affect use.
Manufactured by MONADNOCK.
Telescopic baton - tonfa, with an additional horizontal grip, from British police surplus. Made of hardened steel. Handle with special non-slip foam. With a lock to prevent folding.
Baton manufactured by the American company Monadnock, also used by the police and Military Police in the USA.
Batons in very good condition, with possible scratches that do not affect use.
Frog for the SIG57 Swiss bayonet or knife. Made of webbing in Polish camouflage WZ93 and metal snaps. Thanks to the fact that the loop is fastened, you can hang the bayonet as standard to belt, or attach it to MOLLE equipment.
Frog to the bayonet 6H3, 6H4 or 6H5. Made from Digital Flora carried tape and of metal press studs. Belt loop is being done up - it is possible to hang the bayonet as a default to the belt, or to strap MOLLE kit.
Frog for bayonet 6H3, 6H4 or 6H5 made of natural leather.
Universal scabbard for daggers or throwing knife (also fits a knife "NDR wz 93" from our offer) put on to the belt. Made from Cordura and strengthened inside with plastic insert. Total length of the scabbard - 23 cm.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip rubber. Baton tip in plastic cover. Batons in very good condition, with possible scratches that do not affect use.
