Rechargeable, waterproof torch with 1030 lumens and a range of up to 270 m. Aluminium case with 4 light modes.
FAVOUR tactical torch with mounting rail compatible with the 22mm Picatinny standard. It provides a light output of 320 lumens and a range of up to 200 m. It is equipped with a switch for everyday use and a remote cable switch.
A push switch dedicated to Favour's T2717 and T2815 torches.
Picatinny rail mount dedicated to Favour's T2717 and T2815 torches. Also fits all other 25mm (1") diameter torches and scopes.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip foam. With a lock to prevent folding and a plastic covered nozzle.
Batons in very good condition, with possible scratches that do not affect use.
Security Policy
Delivery Rules
Return Policy
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip foam. With a lock to prevent folding and a plastic covered nozzle.
Batons in very good condition, with possible scratches that do not affect use.
Extended length: 558 mm (+/-5)
Collapsed length: 258 mm
Handle diameter: 27 mm
Maximum head diameter: 48 mm
Weight: 595 g
Frog for the SIG57 Swiss bayonet or knife. Made of Lies (woodland) camo webbing and metal snaps. Thanks to the fact that the loop is fastened, you can hang the bayonet as standard to belt, or attach it to MOLLE equipment.
Upper wooden butt cap for Mosin 1944 carbine. Steel fittings. The caps made of solid wood. Length - 26,2 cm.
Original PK machine gun upper grip covers. Made of wood in a light shade.
Knife for throwing, hammered of the spring steel and black oxide. Blade from both sides. Hilt with holes carried out to the purpose of better breaking down the knife. Cover from the nylon with the possibility of fastening to the strip.
Recoil cap for shooting blank 7.62mm ammunition. For AK-47 or AKM rifles.
Frog to the bayonet 6H3, 6H4 or 6H5. Made from Lies carried tape and of metal press studs. Belt loop is being done up - it is possible to hang the bayonet as a default to the belt, or to strap MOLLE kit.
Metal ammunition box for tape with 250 rounds of 7.62x54R. Such boxes carry ammunition for PK/PKM, Pecheng and formerly Maxim machine guns.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip rubber. Baton tip in plastic cover. Batons in very good condition, with possible scratches that do not affect use.
Small pocket knife with thumb opening and blade lock. Lockable pouch with option to attach to belt or MOLLE equipment.
Broken shell extractor - for extracting from the ammo chamber shells whose bottom has been broken off by the rifle's breech. Designed for 7.62x54R calibre ammunition (e.g. SVD, PK/PKM, Mosin, DP/DT, etc.).
Key-screwdriver for dismantling the Mosin rifle. The key in the version produced up to 1941 with six notches of different sizes - three on each side.
Soviet metal two-chambered rifle oiler. One chamber was for alkaline cleaning fluid (marked Щ - щелочной состав) and the other for gun lubricant (marked Н - ружейная смазка).
Spare leather strap with knop for frog for 6H3, 6H4 or 6H5 bayonet. Brown.
Frog to the bayonet 6H3, 6H4 or 6H5. Made from Digital Flora carried tape and of metal press studs. Belt loop is being done up - it is possible to hang the bayonet as a default to the belt, or to strap MOLLE kit.
Steel magazine for 100 rounds belt of 7.62x39 calibre for the RPD - Diegtiariev Hand Machine Gun. Metal tape split in half with tie-link and guide. In addition, a bag-pouch (Polish manufacture) and 100 copper-plated 7.62x39 shells are included.
THIS PRODUCT CANNOT BE SENT ABROAD FROM POLAND.
Soviet steel magazine, designed for the SVD sniper rifle. Standard capacity of 10 rounds of 7.62x54R.
Telescopic baton from British police surplus. Made of hardened steel. Handle with special non-slip foam. With a lock to prevent folding and a plastic covered nozzle.
Batons in very good condition, with possible scratches that do not affect use.
